112
MIDI Functions
2
Select a channel by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
buttons.
The channel choices are “01” to “16” and “OFF”. The default channel is
“10”. Pressing the [ +1 ] and [ –1 ] buttons simultaneously resets the
channel to “10”.
Use “OFF” if you do not want the RY20’s drum instruments to respond to
MIDI commands.
Set the transmission and reception channel for the bass instrument.
1
Select the Bass Instrument display page by pressing the [PAGE+] or [PAGE–]
button. The current channel flashes beside the “CH” prompt.
2
Select a channel by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
buttons.
The channel choices are “01” to “16” and “OFF”. The default channel is
“01”. Pressing the [ +1 ] and [ –1 ] buttons simultaneously resets the
channel to “01”.
Select “OFF” if you do not want the bass instruments to respond to MIDI
commands.
■ Bass Instrument MIDI Channel
NOTE
If you select the same channel as the drum channel, the drum instruments are given
priority over the bass instruments.
PAGE – PAGE +
PATTERN MIDI
A CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD
To Next Page
Loading...
Need help?
General
