Text LED Text LED Text LED Text LED
0 9 I R
1 A J S
2 B K T
3 C L U
4 D M
<1>
V
5 E N W
<1>
6 F O X none
7 G P Y
8 H Q Z none
<1> Displayed in two digits.
u
LED Screen Displays
Display Lit Flashing Off
When the drive detects an alarm or
error
• When an alarm occurs
• oPE detected
Normal state (no fault or alarm)
Motor is rotating in reverse — Motor is rotating forward
Drive Mode — Programming Mode
Displays output frequency (Hz) — —
As illustrated
in this manual
u
LO/RE LED and RUN LED Indications
LED Lit Flashing
Flashing Quickly
<1>
Off
When run command is
selected from LED
operator (LOCAL)
— —
Run command is selected
from device other than LED
operator (REMOTE)
During run
• During deceleration to
stop
• When a run command
is input and frequency
reference is 0
• During deceleration
at a fast-stop.
• During stop by
interlock operation.
During stop
4.2 Using the Digital LED Operator
YASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000 Installation & Start-Up Manual
75
4
Start-Up Programming
& Operation
2/6/2008-14:44
To Next Page
Loading...
Need help?
General
