Yealink CP860 Administrator's Guide

Configuring Basic Features
103
3. Enter the desired delay time in the Inter Digit Time (1~14s) field.
4. Click Confirm to accept the change.
Call waiting allows IP phones to receive a new incoming call when there is already an
active call. The new incoming call is presented to the user visually on the LCD screen.
Call waiting tone allows the IP phone to play a short tone, to remind the user audibly of
a new incoming call during conversation. Call waiting tone works only if call waiting is
enabled.
The call waiting on code and call waiting off code configured on IP phones are used to
activate/deactivate the server-side call waiting feature. They may vary on different
servers.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or
locally.
Configuration File
y000000000037.cfg
Configure call waiting.
Parameters:
call_waiting.enable
call_waiting.tone
call_waiting.on_code
call_waiting.off_code
Local
Web User Interface
Configure call waiting.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Phone User Interface
Configure call waiting.

Yealink CP860 Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.729ab, iLBC
Handset type	-
Product type	IP Phone
Product color	Black
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Networking standards	IEEE 802.1x, IEEE 802.3af
Supported network protocols	IPv4/IPv6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Storage temperature (T-T)	10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	260 mm
Width	320 mm
Height	52 mm