Administrator’s Guide for CP860 IP conference phones
172
Call transfer is implemented via DTMF on some traditional servers. The IP phone sends
specified DTMF digits to the server for transferring calls to third parties.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configure transfer via DTMF.
Parameters:
features.dtmf.replace_tran
features.dtmf.transfer
Configure transfer via DTMF.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-general&q=loa
d
Details of Configuration Parameters:
features.dtmf.replace_tran
Description:
Enables or disables the IP phone to send DTMF sequences for transfer function when
pressing the transfer soft key or the TRAN key.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will perform the transfer as normal when
pressing the transfer key during a call.
If it is set to 1 (Enabled), the IP phone will transmit the designated DTMF digits to the
server for completing call transfer when pressing the transfer key during a call.
Web User Interface:
Features->General Information->DTMF Replace Tran
Phone User Interface:
None
String within 32 characters