Yealink CP860 Administrator's Guide

Configuring Basic Features
129
Parameter
Permitted Values
Default
None
To specify whether to use outbound proxy server in a dialog via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Use Outbound Proxy in Dialog.
3. Click Confirm to accept the change.
SIP session timers T1, T2 and T4 are SIP transaction layer timers defined in RFC 3261.
Timer T1 is an estimate of the Round Trip Time (RTT) of transactions between a SIP client
and SIP server. Timer T2 represents the maximum retransmitting time of any SIP request
message. The re-transmitting and doubling of T1 will continue until the retransmitting
time reaches the T2 value. Timer T4 represents the time the network will take to clear
messages between the SIP client and server. These session timers are configurable on IP
phones.
Procedure
SIP session timer can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure SIP session timer.
Parameters:
account.X.advanced.timer_t1
account.X.advanced.timer_t2

Yealink CP860 Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.729ab, iLBC
Handset type	-
Product type	IP Phone
Product color	Black
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Networking standards	IEEE 802.1x, IEEE 802.3af
Supported network protocols	IPv4/IPv6
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Number of handles included	- pc(s)
Storage temperature (T-T)	10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	260 mm
Width	320 mm
Height	52 mm