Yealink CP935W User Guide
47
Enter the directed call pickup code followed by the specific extension in the Value field.
l
Select and select the desired contact.
7.
Select .
When the target phone receives an incoming call, you can press the Pick Up key, and the call is answered on your
phone.
Picking up a Call with a Group Pickup Key
You can easily select a Group Pickup key to pick up a group call.
Before You Begin
Check with your system administrator if the group call pickup code is required for this key. If required, get the group
call pickup code from your system administrator.
Procedure
1.
1.
Tap Dsskey.
2. Drag the desired line key to the Edit field.
3. Select Key Event from the Type field.
4. Select Group Pick Up from the Key Type field.
5. Select the desired line from the Account ID field.
6.
Do one of the following:
l
(Optional.) Enter the string that will appear on the phone screen in the Label field.
Enter group call pickup code in the Value field.
l
Select and select the desired contact.
7.
Select .
When any phone within a predefined group of phones receives an incoming call, you can tap the Group Pickup key,
and the call is answered on your phone.
Call Park
You can use call park to place a call on hold, and then retrieve the call from another phone in the system (for
example, a phone in another office or conference room).
Note: Call park is not available on all servers. Contact your system administrator for more information.
Topics
Configuring a Call Park Key
Using Call Park Feature
Configuring a Call Park Key
You need to set a call park key to park an active call.
Before You Begin
You should get the call park code from your system administrator.
Procedure
1.
1.
Tap Dsskey.
2. Drag the desired line key to the Edit field.
3. Select Key Event from the Type field.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
