Phone Customization
212
Topic
Label Length Display Configuration
Label Length Display Configuration
The following table lists the parameters you can use to configure the label length display.
Parameter
features.config_dsskey_length <y0000000000xx>.cfg
Description
It configures the label length displayed on the idle LCD screen for the line key.
Permitted
Values
0-Default
1-Extended
2-Mid-Range (only applicable to T54W/T46U/T46S/T46G/T29G phones)
Default
0
Supported
Devices
All color screen phones
Web UI
Dsskey > Line Key > Label Length
Parameter
features.shorten_linekey_label.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the length of the line key label with 9 digits.
Note: It works only if “features.config_dsskey_length” is set to 0 (Default).
Permitted
Values
0-Disabled, the line key label can display at most 8 digits.
1-Enabled, the line key label can display at least 9 digits.
Default
0
Supported
Devices
T54W, T46U, T46S, T46G, T29G
Label Alignment for Line/Ext Key Display
You can customize the line/Ext key label alignment.
This feature is only applicable to T54W/T46U/T46S/T46G/T33P/T33G/T29G phones and expansion module EXP50
(connected to the T57W/T54W/T53W/T53 phones)/EXP43 (connected to the T48U/T46U/T43U phones).
The following figures show the line key label alignment on T46S/G phones:
To Next Page
Loading...
Need help?
General
