Yealink SIP-T2 User Manual

Phone Customization
248
When using multiple keyboards, you can tap to change the language of the keyboard.
Notification Popups
Notification popups feature allows the IP phone to pop up the message when it misses a call, forwards an incoming
call to another party, receives a new voice mail or a new text message.
The following shows an example of receiving a new voice mail:
Topic
Notification Popups Configuration
Notification Popups Configuration
The following table lists the parameters you can use to configure notification popups.
Parameter
features.voice_mail_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it receives a new voice mail.
If the message disappears, it will not pop up again unless the phone receives a new voice mail or the
user re-registers the account that has unread voice mail(s).
Note: It works only if “account.X.display_mwi.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Features > Notification Popups > Display Voice Mail Popup
Parameter
features.missed_call_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it misses a call.
Note: It works only if “account.X.missed_calllog” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Features > Notification Popups > Display Missed Call Popup
Parameter
features.forward_call_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it forwards an incoming call to another
party.
Permitted
Values
0-Disabled
1-Enabled

Yealink SIP-T2 Specifications

General

Brand	Yealink
Model	SIP-T2
Category	IP Phone
Language	English