Yealink SIP-T2 User Manual

Network Configurations
39
7 is the highest priority, 0 is the lowest priority.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation) and “stat-
ic.network.vlan.pc_port_enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 7
Default
0
Supported
Devices
All phones except CP920
Web UI
Network > Advanced > VLAN > PC Port > Priority
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > VLAN > PC Port > Priority
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > VLAN > PC Port > Pri-
ority
[1]
If you change this parameter, the phone will reboot to make the change take effect.
DHCP VLAN Configuration
When the VLAN discovery method is set to DHCP, the phone examines the DHCP option for a valid VLAN ID. You
can customize the DHCP option used to request the VLAN ID.
The following table lists the parameters you can use to configure DHCP VLAN discovery.
Parameter
static.network.vlan.dhcp_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the DHCP VLAN discovery feature.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Network > Advanced > VLAN > DHCP VLAN > Active
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > VLAN > DHCP VLAN > DHCP VLAN
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > VLAN > DHCP VLAN >
DHCP VLAN
Parameter
static.network.vlan.dhcp_option
[1]
<y0000000000xx>.cfg
Description
It configures the DHCP option from which the phone will obtain the VLAN settings.
Multiple DHCP options (at most five) are separated by commas.
Permitted
Values
Integer from 1 to 255
Default
132
Web UI
Network > Advanced > VLAN > DHCP VLAN > Option (1-255)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > VLAN > DHCP VLAN > Option

Yealink SIP-T2 Specifications

General

Brand	Yealink
Model	SIP-T2
Category	IP Phone
Language	English