Yealink SIP-T2 User Manual

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
379
Password Dial Configuration
Password Dial Configuration
The following table lists the parameters you can use to configure password dial.
Parameter
features.password_dial.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to partly display the callee number when placing a call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > General Information > PswDial
Parameter
features.password_dial.prefix <y0000000000xx>.cfg
Description
It configures the prefix that the number starts with this prefix will be partially displayed.
Example:
features.password_dial.prefix = 12
Note: It works only if “features.password_dial.enable” is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > General Information > PswPrefix
Parameter
features.password_dial.length <y0000000000xx>.cfg
Description
It configures how many digits to be displayed as asterisks.
Example:
features.password_dial.length = 3
If you set the prefix to 12 and the length to 3, when you want to dial the number 123456, the entered
number is displayed as 12***6 on the phone screen.
Note: It works only if “features.password_dial.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 32
Default
Blank
Web UI
Features > General Information > PswLength
Call Timeout
Call timeout defines a specific period of time after which the phone will cancel the dialing if the call is not answered.
Topic
Call Timeout Configuration
Call Timeout Configuration
The following table lists the parameter you can use to configure call timeout.

Yealink SIP-T2 Specifications

General

Brand	Yealink
Model	SIP-T2
Category	IP Phone
Language	English