Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
261
URL DSS key on the phone.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
features.block_linekey_in_menu.enable <y0000000000xx>.cfg
Descrip-
tion
It enables or disables the phone to prevent the user from using line keys when browsing the menu.
Permitted
Values
0-Disabled
1-Enabled, it prevents the user from using line keys.
Default
0
Supported
Devices
All phones except T57W, T48U, T48S, T48G, T30P, T30, T19(P) E2 and CP920
[1]
X is the line key ID. For T57W/T48U/T48S/T48G, X=1-29; for T54W/T46U/T46S/T46G/T29G, X=1-27; for
T53W/T53/T43U/T27G, X=1-21; for T42U/T42G/T42S/T41P/T41S, X=1-15; for T33P/T33G: X=1-12; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2.
Example: Set a Park/Retrieve Key for FAC Call Park Mode
Scenario Conditions Related Topic
features.call_park.park_code = *68
Call Park and Retrieve
features.call_park.park_retrieve_code = *88
features.call_park.park_mode = 1
Example
######Set a Park key######
linekey.1.type = 10
linekey.1.value =4603
linekey.1.label =Bill
######Set a Retrieve key####
linekey.3.type = 56
linekey.3.line =1
linekey.3.value =4603
linekey.3.label =Retrieve Bill
After provisioning, you can easily press the Park key (line key 1) to park a call to a specific extension (4603) during
a call, and press the Retrieve key (line key 3) to retrieve the parked call from the specific extension (4603) when the
phone is idle.
If the “linekey.1.value” is set to blank, the park key will perform as the Park soft key.
Note: In FAC call park mode, the Park/Retrieve key invokes the call park code/park retrieve code by default. Therefore, the
phone dials out *684603 to park a call, and dials out *884603 to retrieve a call. If these codes are not set, you can assign code
and extension to “linekey.X.value”, for example, “*684603”.
To Next Page
Loading...
Need help?
General
