Yealink SIP-T2 User Manual

Directory
346
Default
0
Supported
Devices
All color screen phones
Parameter
phone_setting.search_t9.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to perform an intelligent search when searching for contacts in the dir-
ectory.
Permitted
Values
0-Disabled, the phone only displays the search results of a number match.
1-Enabled
Default
1
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
directory.containing_search.additional_sorting_mode <y0000000000xx>.cfg
Description
It configures the sorting mode in the search results.
Note: It works only if "directory.search_type" is set to 0 (Approximate string matching).
Permitted
Values
0-Sort by ASCII code order.
1-The contacts starting with the searched content are displayed first, and the remaining contacts are
displayed in the ASCII code order.
Default
0
Supported
Devices
T33P, T33G, T31P, T31G, T31, T30P, T30
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Number Matching Settings
You can configure the pattern to match the contact numbers with the caller's phone number.
Topics
Number Matching Settings Configuration
Example: Matching Contacts with the Caller's Phone Number Using the Regular Expression
Number Matching Settings Configuration
The following table lists the parameters you can use to configure number matching settings.
Parameter
phone_setting.reverse_lookup.contact_list.replace.pattern <y0000000000xx>.cfg
Description
It configures the matching pattern used to identify the replaced string of the contact number.
Permitted
Values
Regular Expression
Default
Blank
Related
Parameters
phone_setting.reverse_lookup.contact_list.replace.with
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G

Yealink SIP-T2 Specifications

General

Brand	Yealink
Model	SIP-T2
Category	IP Phone
Language	English