Yealink SIP-T2 User Manual

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
517
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.password <MAC>.cfg
Description
It configures the password of virtual account for XSI access authentication.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled) and it is required only when “sip.au-
thentication_for_xsi” is set to 0 (User Login Credentials for XSI Authentication).
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.host <MAC>.cfg
Description
It configures the IP address of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled).
Permitted
Values
IP address or domain name
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.server_type <MAC>.cfg
Description
It configures the access protocol of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled).
Permitted
Values
HTTP or HTTPS
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.port <MAC>.cfg
Description
It configures the port of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 65535
Default
80
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
account.X.bw_disp_code.Y
[1][2]
<MAC>.cfg
Description
It configures the disposition code which must match one of the codes configured on BroadWorks.
Permitted
Values
Integer from 1 to 2147483647

Yealink SIP-T2 Specifications

General

Brand	Yealink
Model	SIP-T2
Category	IP Phone
Language	English