EasyManuals Logo
Home>Yealink>IP Phone>SIP-T53W

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Security Features
104
Note: It works only if “static.security.var_enable is set to 1 (Enabled).
Permitted
Values
0-user
1-var
2-admin
Default
0
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Auto Logout Time
Auto logout time defines how long the phone will log out of the web user interface automatically when you do not
perform any actions on the web user interface. Once logging out, you must re-enter username and password for
web access authentication.
Topic
Auto Logout Time Configuration
Auto Logout Time Configuration
The following table lists the parameter you can use to configure the auto logout time.
Parameter
features.relog_offtime <y0000000000xx>.cfg
Description
It configures the timeout interval (in minutes) for web access authentication.
Permitted
Values
Integer from 1 to 1000
Default
5
Web UI
Features > General Information > Auto Logout Time(1~1000min)
Phone Lock
You can lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked, anyone must enter the
password to unlock it.
Yealink phones offer three types for phone lock:
l
Lock the Menu soft key: it prevents unauthorized users from accessing the menu, changing the personal set-
tings for your phone.
l
Lock the Function keys: it only allows unauthorized users to use the keypad for placing a call, answering or
rejecting an incoming call and ending a call.
l
Lock all keys: it only allows unauthorized users to use the keypad for dialing an emergency number or author-
ized numbers that set up by your administrator, answer or reject an incoming call and ending a call. The
T57W/T48U/T48S/T48G phones only support All Keys type of phone lock.
You can set a waiting time after which the phone is locked automatically. If the waiting time is set to 0, the phone will
not be automatically locked. You need to lock the phone manually.
Note: The Volume key, HEADSET key and Speakerphone key are always available even when you lock the phone.
Topics
Operation Behaviors on Lock Phone
Phone Lock Configuration

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals