Yealink SIP-T53W Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
313
Multiple Line Keys per Account
You can assign multiple line keys to associate with a specific account. The line keys are automatically assigned
with Line type from the first unused one (unused one means the line key is configured as N/A or the associated
account is not registered). All calls on this account will be distributed evenly among these line keys. It is useful for
managing a high volume of calls to an account.
When you assign multiple line keys to be associated with an account, you can configure the IP phone whether trans-
ferring a call or setting up a conference call on the current line key or on a new distribution line key.
It is not applicable to T19(P) E2/CP920 phones.
Topics
Multiple Line Keys per Account Configuration
Auto Line Labels Rule Configuration
Default Account
Multiple Line Keys per Account Configuration
The following table lists the parameters you can use to configure multiple line keys per account.
Parameter
features.auto_linekeys.enable <y0000000000xx>.cfg
Description
It enables or disables to assign multiple line keys to associate with a specific account.
Note: The number of the line keys is determined by “account.X.number_of_linekey”.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Features > General Information > Auto Linekeys
Parameter
account.X.number_of_linekey
[1]
<MAC>.cfg
Description
It configures the number of line keys to be assigned with a specific account from the first unused one.
If a line key is in used, the phone will skip to the next unused DSS key.
Permitted
Values
Integer from 1 to 999
The number of the line keys varies by phone models, for the supported line keys, refer to Supported
DSS Keys.
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Account > Advanced > Number of Line Key
Parameter
phone_setting.call_appearance.transfer_via_new_linekey <y0000000000xx>.cfg
Description
It enables or disables to distribute a transferring call to a new line key (the new line key is not seized).
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by the parameter “account.X.phone_setting.call_appearance.transfer_via_new_linekey” takes
precedence over that configured by this parameter.
Permitted
Values
0-Disabled, the phone will transfer a call on the current line key.
1-Enabled

Yealink SIP-T53W Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP mobile phone
Product color	Gray
Keypad illumination	Yes
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.2
Security algorithms	AES, HTTPS, SIPS
Networking standards	IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Lines quantity	8 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.3 W
Volume control	Buttons
Number of programmable keys	8
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Number of DECT wireless handsets	4
Voice codecs	G.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC

Weight and Dimensions

Depth	210.6 mm
Width	212 mm
Height	174.5 mm