EasyManuals Logo
Home>Yealink>IP Phone>SIP-T53W

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
Audio Features
146
Audio Features
This chapter describes the audio sound quality features and options you can configure for the IP phone.
Topics
Alert Tone
Touch Tone
Ring Tones
Distinctive Ring Tones
Ringer Device
Audio Volume
Tones
Audio Codecs
Packetization Time (PTime)
Early Media
Headset Prior
Dual Headset
Acoustic Clarity Technology
DTMF
Voice Quality Monitoring (VQM)
Alert Tone
You can configure the following audio alert for the phone:
l Redial tone: allow the phones to continue to play the dial tone after inputting the preset numbers on the dialing
screen.
l Voice mail tone: allow the IP phone to play a warning tone when receiving a new voice mail. You can customize
the warning tone or select specialized tone sets (vary from country to country) for your IP phone.
l Send tone: allow the IP phone to play a key tone when you press the send key. It works only if the key tone is
enabled.
l Dial tone: allow the IP phone to play a specific dial tone for a specified time.
l Key tone: allow the IP phone to play a key tone when you press any key.
Topic
Alert Tone Configuration
Alert Tone Configuration
The following table lists the parameters you can use to configure the alert tone.
Parameter
features.redial_tone <y0000000000xx>.cfg
Description
It configures that after you enter a specific number on the dialing screen, the phone will replay the dial
tone.
Example:
features.redial_tone = 123
The phone will continue to play the dial tone after entering “123 on the dialing screen.
Permitted
Values
Integer within 6 digits
Default
Blank
Web UI
Features > Audio > Redial Tone

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals