Yealink SIP-T53W Administrator's Guide

Call Features
388
Permitted
Values
0-Disabled
1-Enabled
Default
0
DND Feature Configuration
After you choose a DND mode, you can configure the DND feature for all lines or a specific line. It depends on the
DND mode (except T19(P) E2/CP920):
l
Phone (default): DND feature is effective for all lines.
l
Custom: DND feature can be configured for a specific line or multiple lines.
Note: DND mode is set by the parameter “features.dnd_mode”.
Yealink phones also support DND on code and off code to activate and deactivate server-side DND feature. They
may vary on different servers.
Topics
DND in Phone Mode Configuration
DND in Custom Mode Configuration
DND in Phone Mode Configuration
The following table lists the parameters you can use to configure DND in Phone mode.
Parameter
features.dnd.enable <y0000000000xx>.cfg
Description
It triggers the DND feature to on or off.
Note: It works only if “features.dnd.allow” is set to 1 (Enabled) and “features.dnd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
0-Off
1-On, the phone will reject incoming calls on all accounts.
Default
0
Web UI
Features > Forward&DND > DND > DND Status
Phone UI
Menu > Features > DND > DND Status
Parameter
features.dnd.on_code <y0000000000xx>.cfg
Description
It configures the DND on code to activate the server-side DND feature. The phone will send the DND
on code to the server when you activate the DND feature on the phone.
Note: It works only if “features.dnd.allow” is set to 1 (Enabled) and “features.dnd_mode” is set to 0
(Phone) (except T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > DND > On Code
Phone UI
Menu > Features > DND > On Code
Parameter
features.dnd.off_code <y0000000000xx>.cfg
Description
It configures the DND off code to deactivate the server-side DND feature. The phone will send the
DND off code to the server when you deactivate the DND feature on the phone.
Note: It works only if “features.dnd.allow” is set to 1 (Enabled) and “features.dnd_mode” is set to 0

Yealink SIP-T53W Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP mobile phone
Product color	Gray
Keypad illumination	Yes
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.2
Security algorithms	AES, HTTPS, SIPS
Networking standards	IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Lines quantity	8 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.3 W
Volume control	Buttons
Number of programmable keys	8
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Number of DECT wireless handsets	4
Voice codecs	G.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC

Weight and Dimensions

Depth	210.6 mm
Width	212 mm
Height	174.5 mm