EasyManuals Logo
Home>Yealink>IP Phone>SIP-T53W

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
Audio Features
148
Touch Tone
If you enable touch tone and tap the keys (except the off-hook key), the phone will produce a sound when it is not
on the dialing/pre-dialing screen and not in a call.
It is only applicable to CP920 phones.
Topic
Touch Tone Configuration
Touch Tone Configuration
The following table lists the parameter you can use to configure the touch tone.
Parameter
features.touch_tone <y0000000000xx>.cfg
Description
It enables or disables the touch tone.
Permitted
Values
0-Disabled
1-Enabled, when you tap the keys (except the Off-hook key), the phone will produce a sound when it
is not on the dialing/pre-dialing screen and not in a call.
Default
1
Supported
Devices
CP920
Web UI
Features > Audio > Touch Tone
Ring Tones
Ring tones are used to play for incoming calls. You can select a built-in ring tone or a custom ring tone for the
phone system or specific line registration. To set the custom ring tones, you need to upload the custom ring tones to
the IP phone in advance.
You can also specify a period of time after which the phone will stop ringing if the call is not answered.
Topics
Custom Ringtone Limit
Ringtone Configuration
Custom Ringtone Limit
The ring tone format must meet the following:
Phone Model Format Single File Size
T57W/T54W/T48U/T48S/T46U/T46S .wav <=8MB
T48G/T46G/T29G .wav
<=8MB (2.4MB of space should be
reserved for the phone)
T53W/T53/T43U/T42U/T42S/T41S/T42G/T41P/T40P/T40G
/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920
.wav <=100KB
Note: The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate, and 16-bit resolution.

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals