EasyManuals Logo
Home>Yealink>IP Phone>SIP-T53W

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #425 background imageLoading...
Page #425 background image
Advanced Features
422
Group Call Pickup
Group call pickup is used for picking up incoming calls within a predefined group. When any phone within a pre-
defined group of phones receives an incoming call, you can pick up that call easily on the phone.
If you enable group call pickup, the phone screen will display a GPickup soft key when picking up the handset,
pressing the Speakerphone key or pressing the line key. As shown below:
You can pick up the group incoming call using the GPickup soft key.
Tip: You can set a DSS key as a Group Pickup key to pick up a group call. For more information, refer to DSS Keys.
Topic
Group Call Pickup Configuration
Group Call Pickup Configuration
The following table lists the parameters you can use to configure the group call pickup.
Parameter
features.pickup.group_pickup_enable <y0000000000xx>.cfg
Description It enables or disables the user to use GPickup soft key when performing group call pickup feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the GPickup soft key on the Dialing screen.
Default
0
Web UI
Features > Pick up & Park > Group Call Pickup
Parameter
features.pickup.group_pickup_code <y0000000000xx>.cfg
Description
It configures the group call pickup code on a phone basis.
Note: The code configured by “account.X.group_pickup_code” takes precedence over that configured
by this parameter.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Pick up & Park > Group Call Pickup Code
Parameter
account.X.group_pickup_code
[1]
<MAC>.cfg
Description
It configures the group pickup code.
Note: The code configured by this parameter takes precedence over that configured by “fea-
tures.pickup.group_pickup_code”.

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals