Yealink SIP-T53W Administrator's Guide

Configuration Parameters
503
Configuration Parameters
This section provides a description and permitted values of some settings.
Topics
BroadSoft Parameters
Start2Start ACD Parameters
Ethernet Interface MTU Parameters
SIP Settings Parameters
Call Settings Parameters
BroadSoft Parameters
This section shows the parameters you can use to configure the phone with BroadSoft server.
For more information on BSFT, refer to Yealink_IP_Phone_Features_Integrated_with_BroadSoft_UC-One_User_
Guide or Yealink_IP_Phones_Deployment_Guide_for_BroadSoft_UC-One_Environment.
BroadSoft Settings
Parameter
bw.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the BroadSoft features.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
bw.features_status.display_mode <y0000000000xx>.cfg
Description
It configures the icon display mode when the corresponding BSFT feature is enabled on the phone.
Note: It works only if "bw.enable" and "bw.xsi.enable" are set to 1 (Enabled).
Permitted
Values
0-The phone does not display the corresponding icon. (This is the old user experience)
1-Enabled, the phone displays the corresponding icon when it requests the server to enable the cor-
responding feature.
Default
0
Supported
Devices
All color screen phones
Case Scen-
ario
Check which BSFT features are currently enabled through the icons displayed on the phone.
It is available to the following scenarios:
l Always Forward, Busy Forward, No Answer Forward
l Anonymous Call Rejection
l Anonymous Call
l Simultaneous Ring Personal
l Remote Office
Parameter
bw.features.flash_time <y0000000000xx>.cfg
Description
It configures the time (in seconds) when the phone actively requests the BSFT server to enable the fea-
ture .
Note: It works only if "bw.enable" and "bw.xsi.enable" are set to 1 (Enabled).
Permitted
Values
Integer from 0 to 86400

Yealink SIP-T53W Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP mobile phone
Product color	Gray
Keypad illumination	Yes
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.2
Security algorithms	AES, HTTPS, SIPS
Networking standards	IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Lines quantity	8 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.3 W
Volume control	Buttons
Number of programmable keys	8
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Number of DECT wireless handsets	4
Voice codecs	G.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC

Weight and Dimensions

Depth	210.6 mm
Width	212 mm
Height	174.5 mm