EasyManuals Logo
Home>Yealink>IP Phone>SIP-T53W

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #124 background imageLoading...
Page #124 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
121
authentication.
Permitted
Values
A valid string
Default
YealinkSPIP
Parameter
sip.request_validation.event <y0000000000xx>.cfg
Description
It configures which events specified within the Event header of SUBSCRIBE or NOTIFY request
should be validated.
If it is left blank, all events will be validated.
Permitted
Values
A valid string
Default
Blank
USB Port Lock
You can lock the USB port on
T57W/T54W/T53W/T53/T48U/T48S/T48G/T46U/T46S/T46G/T43U/T42U/T42S/T41S/T29G/T27G/CP920 phones.
The following features are not available when you disable the USB port:
l Adding a Wallpaper from a USB Flash Drive
l Adding a Screensaver Picture from a USB Flash Drive
l Wi-Fi (except T57W/T54W/T53W/CP920)
l Bluetooth (except T57W/T54W/T53W/CP920)
l USB Recording
Topic
USB Port Lock Configuration
USB Port Lock Configuration
The following table lists the parameters you can use to configure the USB port lock.
Parameter
static.usb.power.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the USB port.
Permitted
Values
0-Disabled, the phone does not provide power to the USB port and not detect USB devices attached
to the USB port. All the USB devices are disabled on the phone.
1-Enabled
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
static.usbdisk.function.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the USB flash drive feature.
Note: It works only if "static.usb.power.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone cannot detect the USB flash drive attached to the USB port. The USB item will
not appear on the menu screen and there is no USB icon on the status bar. Only the USB flash drive
is disabled, other USB devices such as Bluetooth dongle are still available on the phone.
1-Enabled
Default
1

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals