EasyManuals Logo
Home>Yealink>IP Phone>SIP-T53W

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #177 background imageLoading...
Page #177 background image
Audio Features
174
Acoustic Echo Cancellation (AEC)
Noise Suppression
Background Noise Suppression (BNS)
Automatic Gain Control (AGC)
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Jitter Buffer
Smart Noise Block
Acoustic Shield
Smart Noise Filtering
Acoustic Echo Cancellation (AEC)
Yealink phones employ advanced AEC for hands-free operation. You can configure the AEC feature to remove the
echo of the local loudspeaker from the local microphone without removing the near-end speech.
AEC is not normally required for calls via the handset. In some cases, where echo is experienced by the remote
party, AEC may be used to reduce/avoid echo when you use the handset.
Note: Utilizing acoustic echo cancellation will introduce a small increase of delay into an audio path which might cause a
lower voice quality.
Topic
AEC Configuration
AEC Configuration
The following table lists the parameter you can use to configure AEC.
Parameter
voice.echo_cancellation <y0000000000xx>.cfg
Description
It enables or disables the AEC (Acoustic Echo Canceller) feature.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice > Echo Cancellation > ECHO
Noise Suppression
The impact noise in the room is picked-up, including paper rustling, coffee mugs, coughing, typing, and silverware
striking plates. These noises, when transmitted to remote participants, can be very distracting.
You can enable the Noise Suppression feature to suppress these noises.
It is only applicable to CP920 phones.
Topic
Noise Suppression Configuration
Noise Suppression Configuration
The following table lists the parameter you can use to configure noise suppression.
Parameter
voice.tns.enable <y0000000000xx>.cfg
Description
It enables or disables the Noise Suppression feature.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals