EasyManuals Logo
Home>Yealink>IP Phone>SIP-T53W

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
Audio Features
156
Topic
Ringer Device Configuration
Ringer Device Configuration
The following table lists the parameters you can use to configure the ringer device.
Parameter
features.ringer_device.is_use_headset <y0000000000xx>.cfg
Description
It configures the ringer device for the phone.
Note: To use speaker, make sure “features.speaker_mode.enable” is set to 1 (Enabled). To use the
headset, make sure “features.headset_mode.enable” is set to 1 (Enabled).
Permitted
Values
0-Use Speaker
1-Use Headset
2-Use Headset & Speaker
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > Audio > Ringer Device for Headset
Audio Volume
You can configure the sending volume and ringer volume for the phone.
Topics
Ringer Volume Configuration
Sending Volume Configuration
Ringer Volume Configuration
You can configure the ringer volume as a fixed level, so the user cannot adjust the ringer volume on the phone.
This feature is used to avoid missing calls when the user turns down the ringer volume.
The following table lists the parameters you can use to configure the ringer volume.
Parameter
force.voice.ring_vol <y0000000000xx>.cfg
Description
It configures the ring tone as a fixed volume.
Permitted
Values
Blank-the user can adjust the ringer volume on the phone.
0 to 15-the user cannot adjust the ringer volume on the phone, the ring tone is the configured volume.
Default
Blank
Parameter
phone_setting.voice.ring_vol_min <y0000000000xx>.cfg
Description
It configures the adjustable minimum ringer volume on the phone.
Note: It only takes effect on the ringer volume of the speaker on the phone. After the headset is con-
nected, the ringer volume can only be controlled by the headset itself.
Permitted
Values
Integer from 0 to 15
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals