To Next Page

To Previous Page

5-4

IM WT5000-01EN

Motor/Aux Settings (Ch Settings)

Set the following items according to the MTR configuration.

When the MTR Configuration Is Set to Single Motor (revolution signal: pulse), Single Motor (revolution

signal: analog), or Double Motor

• Scaling factor (Scaling)

• Unit (Unit)

• Input signal type (Sense Type)

• Analog input auto range (Analog Auto Range)

• Analog input range (fixed range) (Analog Range)

• Setting the linear scaling of analog input manually (Linear Scale A, B)

• Computing the linear scaling of analog input from two points (Calculation)

• Line filter (Line Filter(Butterworth))

• Pulse noise filter (Pulse Noise Filter)

• Sync source (Sync Source)

• Upper and lower limits of pulse input range (Pulse Range Upper, Pulse Range Lower)

• Torque signal pulse rating

• Revolution Signal Pulses per Revolution (Pulse N)

• Motor Poles (Pole)

• Frequency Measurement Source (Source)

When the MTR Configuration Is Set to Auxiliary Input (Aux)

• Input signal name (Aux Name)

• Scaling factor (Scaling)

• Unit (Unit)

• Input signal type (Sense Type)

• Analog input auto range (Analog Auto Range)

• Analog input range (fixed range) (Analog Range)

• Setting the linear scaling of analog input manually (Linear Scale A, B)

• Computing the linear scaling of analog input from two points (Calculation)

• Line filter (Line Filter(Butterworth))

• Pulse noise filter (Pulse Noise Filter)

• Upper and lower limits of pulse input range (Pulse Range Upper, Pulse Range Lower)

Input Signal Name (Aux Name)

When you set the MTR configuration auxiliary input (Aux), set the input signal name.

• Number of characters: Up to eight

• Usable characters: Spaces and all characters that are displayed on the keyboard

5 Motor Evaluation and Auxiliary Input (Option)

YOKOGAWA WT5000 Features Guide

Other manuals for YOKOGAWA WT5000