10-1
IM WT5000-01EN
10 Numeric Data Display
Numeric Data Display (NUMERIC)
You can press NUMERIC to make the numeric data display appear.
Each time you press NUMERIC, the display format switches, in order, between All, 4 Items, 8 Items, 16 Items,
Matrix, Hrm List Single, and Hrm List Dual.
Numeric Data Display Format
You can select the number of numeric data items that are displayed simultaneously from the choices below or
choose to display a list of items.
All Display (All Items)
A table of numeric data is displayed with measurement functions listed vertically and symbols indicating
elements and wiring units listed horizontally. You cannot change the order of the displayed items. The number of
displayed items varies depending on the number of elements that are installed in this instrument.
4-Value Display (4 Items)
Four numeric data values are displayed in two columns.
8-Value Display (8 Items)
• When the display format is single screen display (full screen display), eight numeric data values are displayed
in two columns.
• When the display format is split display, eight numeric data values are displayed in four columns.
16-Value Display (16 Items)
Sixteen numeric data values are displayed in four columns.
Matrix Display
A table of numeric data is displayed with measurement functions listed vertically and symbols indicating
elements and wiring units listed horizontally. You can change the order of the displayed items and the number of
columns.
To Next Page
Loading...
Need help?
General
