Zebra LS2208 Reference Guide

Undecoded Scanner Emulation Interface 10 - 3
Undecoded Scanner Emulation Default Parameters
Table 10-1 lists the defaults for the undecoded scanner emulation host. To change an option, scan the appropriate
bar code(s) in the Undecoded Scanner Host Parameters section beginning on page 10-5.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 10-1 Undecoded Scanner Emulation Default Table
Parameter Default Page Number
Beep Style Beep on Successful Transmit 10-5
Parameter Pass-Through Parameter Process and Pass Through 10-6
Convert Newer Code Types Convert Newer Code Types 10-7
Module Width 20 µs 10-7
Convert All Bar Codes to Code 39 Do Not Convert to Bar Codes to Code 39 10-8
Code 39 Full ASCII Conversion Disable 10-8
Transmission Timeout 3 seconds 10-9
Ignore Unknown Characters Ignore Unknown Characters 10-10
Leading Margin 2 ms 10-11
Check for Decode LED Check for Decode LED 10-12
1
User selection is required to configure this interface and this is the most common selection.

Zebra LS2208 Specifications

General

Brand	Zebra
Model	LS2208
Category	Scanner
Language	English