Zebra LS2208 Reference Guide

Advanced Data Formatting 14 - 3
Rule 1: The Code 128 Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 14-6 High High
2 Code 128 14-9 High High
3 Send next 5 characters 14-20 High High
4 Send <CTRL M> 14-39 High High
5 Send next 5 characters 14-20 High High
6 Send <CTRL P> 14-40 High High
7 Send next 2 characters 14-20 High High
8 Send <CTRL D> 14-38 High High
9 Save Rule 14-6 High Low High Low
Rule 2: The UPC Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 14-6 High High
2 UPC/EAN 14-10 High High
3 Send all remaining data 14-20 High High
4 Send <CTRL M> 14-39 High High
5 Save Rule 14-6 High Low High Low
If you made any mistakes while entering this rule, scan Quit Entering Rules on page 14-7. If you already saved the
rule, scan Erase Previously Saved Rule on page 14-7.
Alternate Rule Sets
You can group ADF rules into one of four alternate sets which you can turn on and off when needed. This is useful
to format the same message in different ways. For example, a Code 128 bar code contains the following
information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
This bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily you would send this data as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)

Zebra LS2208 Specifications

General

Brand	Zebra
Model	LS2208
Category	Scanner
Language	English