About This Guide
Introduction
The LS2208 Product Reference Guide provides general instructions for setting up, operating, maintaining and
troubleshooting the LS2208.
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides a product overview and unpacking instructions.
•
Chapter 2, Scanning describes parts of the scanner, beeper and LED definitions, and how to use the scanner
in hand-held and hands-free modes.
•
Chapter 3, Maintenance and Technical Specifications provides information on how to care for the scanner,
troubleshooting, and technical specifications.
•
Chapter 4, User Preferences provides programming bar codes for selecting user preference features for the
scanner.
•
Chapter 5, Keyboard Wedge Interface provides information for setting up the scanner for Keyboard Wedge
operation.
•
Chapter 6, RS-232 Interface provides information for setting up the scanner for RS-232 operation.
•
Chapter 7, USB Interface provides information for setting up the scanner for USB operation.
•
Chapter 8, IBM 468X/469X Interface provides information for setting up the scanner with IBM 468X/469X
POS systems.
•
Chapter 9, Wand Emulation Interface provides information for setting up the scanner for Wand emulation
operation.
•
Chapter 10, Undecoded Scanner Emulation Interface provides information for setting up the scanner for
Undecoded Scanner emulation operation.
•
Chapter 11, 123Scan2 (PC based scanner configuration tool) provides the bar code to scan to communicate
with the 123Scan
2
program.
To Next Page
Loading...
Need help?
General
