Zebra LS2208 Reference Guide

Undecoded Scanner Emulation Interface 10 - 5
Undecoded Scanner Emulation Host Parameters
Beep Style
The undecoded scanner emulation host supports three different beep styles.
The default is to beep when the attached decoder issues the decode signal to the scanner. This way, the scanner
and the attached decoder beep at the same time.
The second option is to beep on the scanner's decode. This results in a double beep sequence from most
decoders, since the scanner beeps, and the decoder beeps (at a different frequency) when it successfully decodes
the output.
The third option is to not beep at all since the attached decoder issues the decode beep.
In all cases, if an error occurs, the scanner issues error beeps.
*Beep On Successful Transmit
Beep At Decode Time
Do Not Beep

Zebra LS2208 Specifications

General

Brand	Zebra
Model	LS2208
Category	Scanner
Language	English