Zebra LS2208 Reference Guide

10 - 12 LS2208 Product Reference Guide
Check For Decode LED
The attached decoder normally asserts the Decode line to signal to the undecoded scanner emulation host that it
successfully decoded the transmitted bar code. Some decoders, however, do not assert the Decode signal to tell
the scanner that a decode occurred. In this case, the scanner emits Transmit Error beeps to indicate that the bar
code was not successfully transmitted. Scan the Ignore Decode LED bar code below to disable the Transmit Error
beeps.
*Check For Decode LED
Ignore Decode LED

Zebra LS2208 Specifications

General

Brand	Zebra
Model	LS2208
Category	Scanner
Language	English