Zebra LS2208 Reference Guide

14 - 6 LS2208 Product Reference Guide
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on page 14-24 inserts a pause in the data transmission. To
set the pause scan a two-digit number (i.e., two bar codes), to represent a 0.1 second interval. For example, scan
bar codes 0 and 1 from Appendix D, Numeric Bar Codes to insert a 0.1 second pause; scan 0 and 5 for a 0.5
second delay. To correct an error or to change a selection, scan Numeric Cancel on page D-3.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule.
Save Rule
Scan this bar code to save the rule you entered.
Begin New Rule
Save Rule

Zebra LS2208 Specifications

General

Brand	Zebra
Model	LS2208
Category	Scanner
Language	English