Zebra LS2208 Reference Guide

Scanning 2 - 7
Scanning in Hands-Free Mode
The LS2208 Intellistand adds greater flexibility to scanning operation. See Assembling the Stand, Mounting the
Stand (optional), and Scanning in the Hands-Free Mode for more information about hands-free scanning.
Assembling the Stand
Figure 2-5 Assembling the Stand
Stand base
Wingnut
1.
Unscrew the wing nut
from the bottom of the
one piece scanner “cup”.
2. Fit the bottom of the neck
piece into the opening on
the top of the stand base.
3. Tighten the wing nut
underneath the base to
secure the cup and neck
piece to the base (see
the note below).
4. Bend the neck to the
desired position for
scanning.
One piece scanner
“cup” with flexible neck.
Flat areas
NOTE Before tightening the wing nut under the base, ensure that the flat areas on the flexible neck fit securely in
the grooves in the base.

Zebra LS2208 Specifications

General

Brand	Zebra
Model	LS2208
Category	Scanner
Language	English