Zebra MC55 User Manual

Appendix B Special Software
Configurations
Bluetooth Configuration Settings
The MC55 supports both the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack. Only one
Bluetooth stack can be used at a time. By default, the StoneStreet One Bluetooth stack is enabled. A registry key
on the MC55 can be modified to disable the StoneStreet One stack and enable the Microsoft stack.
Using a registry editor, navigate to the following:
[HKEY_LOCAL_MACHINE\Software\SymbolBluetooth
Edit the following key:
“SSStack”=dword:1
where:
0 = disable StoneStreet One stack and enable Microsoft stack
1 = enable StoneStreet One stack and disable Microsoft stack (default)
After setting the registry key, warm boot the MC55.
Battery Usage Threshold Setting
By default the Battery Usage Threshold value is set to a pre-defined value (400 by default). To change the
threshold value, a registry key must be created to allow changing this value.
A battery becomes unhealthy when the Battery Usage Indication reach a predefined threshold (end of usable life).
NOTE Battery Usage Threshold setting is only available on MC55A0 configurations.
NOTE The point at which a battery becomes unhealthy may vary depending upon the environment and charging
conditions

Zebra MC55 Specifications

General

Brand	Zebra
Model	MC55
Category	Handhelds
Language	English