Zebra MC55 User Manual

2 - 24 MC55 Integrator Guide
Charge Only Cable
The Charge Only cable provide the MC55 with operating and charging power when used with the Zebra approved
power supply.
Figure 2-24 Charge Only Cable
Auto Charge Cable
The Auto Charge cable plugs into a vehicle cigarette lighter and provide the MC55 with operating and charging
power.
Figure 2-25 Auto Charge Cable
Connecting to the MC55
1. If required, connect the cable power input connector to the Zebra approved power source.
2. Slide the bottom of the MC55 into the connector cup end of the cable until the MC55 is firmly seated in the cup.
3. Slide the two locking tabs up until they both lock into position.

Zebra MC55 Specifications

General

Brand	Zebra
Model	MC55
Category	Handhelds
Language	English