2 - 22 MC55 Integrator Guide
Four Slot Battery Charger
This section describes how to use the Four Slot Battery Charger to charge up to four MC55 spare batteries.
Spare Battery Charging
1. Connect the charger to a power source.
2. Insert the spare battery into a spare battery charging well and gently press down on the battery to ensure
proper contact.
Figure 2-22
Four Slot Spare Battery Charger
Battery Charging Indicators
An amber LED is provided for each battery charging well. See Table 2-3 for charging status indications. The 2400
mAh battery fully charges in approximately four hours and the 3600 mAh battery charges in approximately six
hours.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
charger in order to ensure safe operation and optimize long-term battery life.
To accomplish this, for small periods of time, the charger alternately enables and disables battery charging to keep
the battery at acceptable temperatures. The charger indicates when charging is disabled due to abnormal
temperatures via its LED. See Table 2-3.
Battery Charging
LEDs (4)
Battery
To Next Page
Loading...
Need help?
General
