Chapter 6 MC5574 - GSM Configuration
Introduction
This chapter explains how to verify MC5574 service on an Global System for Mobile communications (GSM)
wireless network and establish settings.
GSM networks deliver mobile voice and data services, such as Short Message Service (SMS)/Text Messaging,
with full roaming capabilities across the world. GPRS enabled networks offer Internet-based content and
packet-based data services. This enables services such as internet browsing, e-mail on the move, powerful visual
communications, multimedia messages, and location-based services.
When using the MC55 as a phone, services can include speed dialing, call tracking, voice mail, call forwarding,
conference calling, and caller ID, depending on the type of service.
Also use the integrated phone as a modem to connect the MC55 to an ISP or work network. The GSM enabled
MC55 can connect to the Internet or work network using Cellular Line, or using the modem specified by the mobile
phone service provider.
Quick Startup Steps
To use the MC55 for phone and data connections:
1. Install the MC55 main battery. See Installing the Battery on page 1-4.
2. Fully charge the main battery. See Charging the Battery on page 1-5.
3. Press the red Power button to suspend the MC55.
4. Remove the battery.
5. Install a SIM card. See for Installing the SIM Card on page 1-3 installation procedures.
6. Replace the battery.
7. Press the red Power button.
NOTE Before using an MC55 on a wireless network, first select a provider, establish a voice and data-enabled service
plan, and configure the MC55 (where applicable). Refer to the MC55 User Guide for information on how to use
the phone and services.
To Next Page
Loading...
Need help?
General
