Application Deployment 4 - 5
•
Open the Storage Card directory.
•
Tap the package CAB file. The application installs on the MC55.
Installation Using USB Connection
To install an application or copy files to the MC55 using a USB connection:
1. On the MC55, tap Start > Settings > System > USB Config icon.
Figure 4-1
USBConfig Window
2. Tap USB Client radio button.
3. On the MC5574/90:
a. In the drop-down list, select Mass Storage.
b. In the Choose Disk section, select either Storage Card, Application or Cache Disk.
c. Tap OK.
4. On the MC55A0:
a. Tap USB Client Mode tab.
b. Select Mass Storage.
c. In the drop-down list, select either Storage Card, Application or Cache Disk.
d. Tap OK.
5. Connect the MC55 to a host computer using either a single slot cradle or a USB cable.
6. On the host computer, open Windows Explorer. The MC55 appears as a hard disk drive in Windows
Explorer.
7. Double-click the drive letter to open the folder. Note that if \Application folder is selected, the folder
__TFAT_HIDDEN_ROOT_DIR__ appears. Double click to open the folder.
8. On the host computer, open another Windows Explorer window and locate the files to copy to the MC55.
9. Drag the files from the new window to the MC55 folder window.
10. When complete, disconnect the MC55 from the host computer.
To Next Page
Loading...
Need help?
General
