10-8 Key Programming
Maintenance and Safety
10
Key Programming
Key Programming
Items Required:
• Yellow key: quantity 1
• Black keys: quantity 1 or 2
Program
Programming Note: Pause for one second between
each key turn.
Note: Only two black keys can be programmed to
one motorcycle.
Note: If the yellow key is lost, it is not possible to get
a replacement yellow key using the key number.
Note: Each key switch has its own exclusive yellow
key. If the yellow key is lost, the entire key switch
must be replaced to get a replacement yellow key.
1. Insert the yellow key into the key switch.
2. Turn the yellow key to the ON position and the
to the OFF position. This takes motorcycle out
of programming mode.
3. Remove the yellow key.
4. Insert one black key.
5. Turn the black key to the ON position and then
to the OFF position.
6. Remove the first black key.
7. Insert the second black key.
To Next Page
Loading...
Need help?
General
