Aggregation with trailer and semitraile
Maximum permitted vertical static suspensions load for trailers and semitrailers
Maximum weight of aggregated braked trailer or semitrailer must not exceed the value given
on tractor's production plate and the data given in vehicle identification card. Maximum speed of the
set is given by the maximum permitted speed of the slower vehicle of the set.
Tractor must be aggregated only with a tractor trailer for
balancing tractor operation brakes or hydraulic brakes of
trailer. Static load of tractor rear axle in aggregation with
semitrailer must not exceed the value of maximum
permitted load.
NM13N097
Suspension type
Permitted
vertical
static
load
Ø of
suspension
pin
Suspension type
Permitted
vertical
static
load
Ø of
suspension
pin
2 000 kg
31 mm
736 kg
31 mm
2 000 kg
38 mm
1200 kg
32 mm