Maintenance and treatment of tires
Detaching tractor
Regularly inspect the outer surface of a tire and inspect
that there are no defects in side or above the base part of
rollers and that body is not damaged.
Remove tires which have defects from further
use.
Tire inflation
Basic values of recommended inflation are given in
chapter 'Main technical parameters'. Check pressure
regularly before driving, if tire
s are cold. Use pressure
re
gulator for inflation (A), which fulfils the function of
pressure equalizer, tire filler and locking valve. Screw
a hose for tire inflation. Screw the hose to the end of coil
so that back valve will be compressed. If there is
maximum pressure in air collector, a tire cannot be
inflated. In such case it is necessary to first lower the
pressure by a valve for draining condensate placed in the
bottom part of air collector (B).
NM13N071
When putting the tractor out of operation for a longer
period of time (warehousing), support the tractor and
lower the pressure in tires to a minimum (wheels must not
touch the ground).
E743
To Next Page
Loading...
Need help?
General
