Zetor MAJOR User Manual

Rear PTO shaft - independent revolutions
Rear PTO shaft - dependent revolutions
Maximum transmitted output
With independent revolutions of rear PTO shaft the
number of PTO shaft revolutions is dependent on the
number of engine revolutions.
PTO shaft drive engagement lever must be shifted to (b)
position.
Pulling the lever of manual PTO shaft clutch
disengagement serves for short-term interruption of torque
transmission from engine.
The lever of PTO shaft drive must be shifted to (n) position
for longer interruption of torque transmission from engine.
The number of PTO shaft independent revolutions, see
Main technical parameters chapter.
NM13N006
With dependent revolutions of rear PTO shaft the number
and the direction of PTO shaft revolutions is dependent on
the shifted gear of reversing lever, engaged speed gear
and the group of gears engaged by reduction lever.
PTO shaft drive engagement lever must be shifted in (a)
position.
Depressing the clutch pedal serves for short-term
interruption of torque transmission from engine.
It is necessary to shift the lever of PTO shaft drive
engagement to (n) position or to shift the lever of gears or
the lever of road and reduced speeds to (n) position for
longer interruption of torque from engine.
Manual disengagement of PTO shaft clutch
lever is shifted in (a) position non-functional with
lever of PTO shaft drive engagement.
The number of dependent PTO shaft revolutions, see
Main technical parameters chapter.
NM13N007
PTO shaft Transmitted
output
rear
1000 rpm Full engine output
540 rpm Full engine output
C353
DRIVE OF AGRICULTURAL MACHINERY
55

Zetor MAJOR Specifications

General

Hydraulic System	Open center
Displacement	4.156 l
Number of Cylinders	4
PTO Speed	540/1000 rpm
Engine Type	Zetor
Engine	Zetor