ABB A200-L User Manual

Operation Manual / A200-L
9 Disassembly and assembly / 9.12 Dismantling the nozzle ring (A280-L)
© Copyright 2021 ABB. All rights reserved. HZTL4036_EN Rev.T December 2021
Fig.49: Dismantling the nozzle ring
1. Loop around the nozzle ring holder(90477) with the lifting gear and secure it to the
crane.
2. Loosen screws(56014) and remove with washers(56011).
3. Pull the nozzle ring(56001) towards the front onto the nozzle ring holder.
4. Screw the screws (B
2
) into the nozzle ring holder.
5. Remove screws(B
1
).
Fig.50: Put down the nozzle ring
u Use the crane to remove and put down the nozzle ring (56001).
Page 92 / 145

ABB A200-L Specifications

General

Brand	ABB
Model	A200-L
Category	Battery Charger
Language	English