ACS2000 User manual 2UEA001270 Rev. F 7-1 (6)
Chapter 7 - Commissioning
7.1 Required qualification
Commissioning, parameter adjustments and functional tests are only to be
performed by qualified commissioning personnel certified by ABB.
7.2 Procedure
Information on the commissioning procedure and the start conditions for
commissioning can be obtained from ABB.
See section General information on manual and equipment for contact
information.
7.3 Checklist
In order to ensure uncomplicated and speedy commissioning, it is
important that drive and associated equipment are ready for
commissioning. Reviewing and completing the items in the
Commissioning checklist before the commissioning personnel arrive on
site will help to achieve this.
7.4 Customer assistance
During the commissioning period, the customer is requested to provide
qualified personnel for assistance, who are:
• experienced with medium and low voltage equipment and with the
local safety regulations,
• familiar with the driven process,
• authorized to operate associated medium and low voltage equipment
(MV switchgear, other low and medium voltage switchgear, etc.),
• authorized to operate the driven process for functional tests.
7.5 Customer acceptance
When commissioning has been completed, the commissioning report is
signed by the responsible commissioning personnel and by the customer
as a sign of acceptance. A copy of the report and a copy of the actual
parameter settings are presented to the customer.
To Next Page
Loading...
Need help?
General
