ACS2000 User manual 2UEA001270 Rev. F GI-3 (14)
General information on manual and equipment
Appendix P -
Integral input contactor
disconnect operation
guide
Provides detailed information on the integral input contactor disconnect
option.
Contact information
Address ABB Inc.
Medium Voltage Drives
16250 W. Glendale Drive
New Berlin, WI 53151
Phone 262-785-2877
Fax 262-785-3322
Email mv.drives.sales@us.abb.com
www.abb.us/drives
Global www.abb.com
Target groups and required qualifications
The equipment presented in this manual is part of an industrial
environment where voltages are present that contain a potential hazard of
electric shock, burn, physical injury and/or death. For this reason, only
personnel who have a thorough knowledge of the equipment and the
industrial environment and have obtained the required qualification should
handle, install, operate or maintain the equipment.
The manual addresses personnel who are responsible for unpacking,
transportation, installation, operation and maintenance of the equipment.
The personnel must carry out the below listed tasks in a manner that does
not cause physical harm or danger and ensures the safe and reliable
function of the equipment.
Note: Commissioning of drive equipment must only be performed by
qualified and certified ABB personnel.
Handling Personnel must be skilled and experienced in unpacking and transporting
heavy equipment.
Mechanical installation Personnel must be qualified to prepare the installation site according to
the site and equipment requirements and to perform the installation
accordingly.
Electrical installation Personnel must have a sound knowledge of the relevant electrical codes
and specifications covering low and medium voltage equipment, be
experienced with electrical wiring principles and understand the electrical
symbols typically used in wiring diagrams.
To Next Page
Loading...
Need help?
General
