GI-2 (14) 2UEA001270 Rev. F ACS2000 User manual
General information on manual and equipment
Structure of the user documentation
The complete set of user documentation of a standard drive consists of
this manual and supplementary documentation that is provided in the
following appendices, located on the CD:
Appendix A -
ACS2000
Maintenance schedule
Recommended maintenance service schedule.
Appendix B -
Fieldbus adapter
manuals
Manuals about fieldbus interfaces.
Appendix C -
Technical data
Technical data sheets of the drive.
Appendix D -
Mechanical drawings
Outline drawing(s) of the equipment.
Appendix E -
Wiring diagrams
Circuit diagrams with information on device designation, cross-reference
and device-identification conventions. The diagrams are generated
according to the customer-specific project.
Appendix F -
Spare parts manual
This parts manual is generated for each drive. Includes all information
necessary to identify a component.
Appendix G -
MV switchgear guide
Provides detailed information on the MV (Medium Voltage) switchgear.
Appendix H -
Cable specifications
Power cable specifications for drive connections.
Appendix I -
Kirk key specifications
Kirk
®
key interlock specifications.
Appendix K -
Pulse encoder
Pulse encoder specifications.
Appendix L -
Motor temperature
supervision
Motor temperature supervision information.
Appendix M-
Signal and parameter
table
Descriptions of actual signals, control and status words, and control
parameters and their default settings.
Appendix N -
Troubleshooting guide
Information on the root cause of an alarm or fault and provides hints for
corrective measures.
Appendix O -
DriveMonitor
™
3000 user manual
Provides instructions for remote monitoring.
To Next Page
Loading...
Need help?
General
