4-2 (8) 2UEA001270 Rev. F ACS2000 User manual
Chapter 4 - Transportation, storage and disposal
4.1.2 Lifting and transportation
Preparation is required to transport the ACS2000 drive properly. Take into
consideration the height*, width, depth and weight of the drive.
Figure 4-1 Transport dimensions (Frame 2 pictured)
* The shipping pallet will add additional overall height.
Have the following information at hand before transporting the cabinet:
• Appendix D - Mechanical drawings, located on the CD, provides
details on specific dimensions and weight of the cabinet.
4.1.2.1 General notes on transportation
Observe the following points when transporting the cabinet:
• The cabinet can be transported using a crane or a forklift.
• Drive components can be damaged during transportation. Therefore,
the cabinet must be transported in an upright position.
• Measure the drive and make sure that the transportation path through
any structures, such as doorways, is sufficient for the size of the drive.
• Ensure that no dirt enters the cabinet during transportation. Keep the
doors closed. Metallic dust in particular may cause damage and lead
to malfunction when the drive is powered up.
To Next Page
Loading...
Need help?
General
