12 About the manual
Contents
The manual consists of the following chapters:
• The ACS850 control panel provides a description and instructions for use of the
control panel.
• Control locations and operating modes describes the control locations and
operation modes of the drive.
• Program features contains descriptions of the features of the ACS850 standard
control program.
• Application macros contains a short description of each macro together with a
connection diagram.
• Parameters describes the parameters of the drive.
• Additional parameter data contains further information on the parameters.
• Fault tracing lists the alarm (warning) and fault messages with possible causes
and remedies.
• Control through the embedded fieldbus interface describes the communication to
and from a fieldbus network using an embedded fieldbus interface.
• Control through a fieldbus adapter describes the communication to and from a
fieldbus network using an optional fieldbus adapter module.
• Drive-to-drive link describes the communication between drives connected
together by the drive-to-drive link.
• Control chain and drive logic diagrams.
Related manuals
The delivery of the drive includes a multilingual Quick Start-up Guide.
A complete list of related manuals is printed on the inside of the front cover.
Terms and abbreviations
Term/abbreviation Definition
AI Analog input; interface for analog input signals
AO Analog output; interface for analog output signals
DC link DC circuit between rectifier and inverter
DI Digital input; interface for digital input signals
DO Digital output; interface for digital output signals
DTC Direct torque control
EFB Embedded fieldbus
FBA Fieldbus adapter
FEN-01 Optional TTL encoder interface module for the ACS850
FEN-11 Optional absolute encoder interface module for the ACS850
FEN-21 Optional resolver interface module for the ACS850
To Next Page
Loading...
Need help?
General
