ABB ACS850 User Manual

50 The ACS850 control panel
 Drive Info
In the Drive Info option, you can:
• view information on the drive,
• start, stop, change the direction and switch between local and remote control.
How to view drive info
Step Action Display
1. Go to the Main menu by pressing if you are in the
Output mode.
Otherwise press repeatedly until you get to the
Main menu.
2. Go to the Drive info option by selecting DRIVE INFO on
the menu with keys and , and pressing
.
3. The display shows information about the drive. You can
scroll the information with keys and . Note:
The information shown may vary according to the
firmware version of the drive.
DRIVE NAME: Drive name defined as a text in
DriveStudio commissioning and maintenance tool
DRIVE TYPE: e.g. ACS850
DRIVE MODEL: Type code of the drive
FW VERSION: See page 45.
SOLUTION PROGRAM: Version information of the active
application program
BASE SOLUTION PROGRAM: Version information of
the application program template
STANDARD LIBRARY: Version information of the
standard library
TECHNOLOGY LIBRARY: Not applicable to the ACS850
POWER UNIT SERNO: Serial number of the power
stage (JPU)
MEM UNIT HW SERNO: Serial number in manufacturing
the memory unit (JMU)
MEM UNIT CONFIG SERNO: Serial number in
configuring the memory unit (JMU).
Press to return to the Main menu.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER
00:00
MAIN MENU 1
LOC
ENTER
EXIT
00:00
DRIVE NAME
-
DRIVE TYPE
ACS850
DRIVE MODEL
DRIVE INFO
LOC
EXIT
EXIT
00:00
FW VERSION
UIFI, 2020, 0,
SOLUTION PROGRAM
-
BASE SOLUTION PROGRAM
DRIVE INFO
LOC

ABB ACS850 Specifications

General

Brand	ABB
Model	ACS850
Category	DC Drives
Language	English