18 The ACS850 control panel
îš„ Status line
The top line of the LCD display shows the basic status information of the drive.
No. Field Alternatives Significance
1 Control location LOC Drive control is local, that is, from the control panel.
REM Drive control is remote, such as the drive I/O or fieldbus.
2 State Forward shaft direction
Reverse shaft direction
Rotating arrow Drive is running at reference.
Dotted rotating
arrow
Drive is running but not at reference.
Stationary arrow Drive is stopped.
Dotted stationary
arrow
Start command is present, but the motor is not running,
e.g. because start enable signal is missing.
3 Panel operation mode • Name of the current mode
• Name of the list or menu shown
• Name of the operation state, e.g. REF EDIT.
4 Reference value or
number of the
selected item
• Reference value in the Output mode
• Number of the highlighted item, e.g mode, parameter
group or fault.
30.00rpmLOC
1 2 4
LOC MAIN MENU 1
1 2 3 4
To Next Page
Loading...
Need help?
General
