ABB ACS850 User Manual

246 Parameters
64.08 Time of peak The time at which the peak value was recorded.
00:00:00 …
23:59:59
Peak occurrence time. 1 = 1 s
64.09 Current at peak Motor current at the moment the peak value was recorded.
-32768.00 …
32768.00 A
Motor current at peak. 100 = 1 A
64.10 Dc volt at peak Voltage in the intermediate DC circuit of the drive at the
moment the peak value was recorded.
0.00 … 2000.00 V DC voltage at peak. 100 = 1 V
64.11 Speed at peak Motor speed at the moment the peak value was recorded.
-32768.00 …
32768.00 rpm
Motor speed at peak. 100 = 1 rpm
64.12 Date of reset The date the peak value logger and amplitude logger 2 were
last reset.
01.01.80 … Last reset date of loggers (dd.mm.yy). 1 = 1 d
64.13 Time of reset The time the peak value logger and amplitude logger 2 were
last reset.
00:00:00 …
23:59:59
Last reset time of loggers. 1 = 1 s
64.14 AL1 0 to 10% Percentage of samples recorded by amplitude logger 1 that
fall between 0 and 10%.
0.00 … 100.00% Amplitude logger 1 samples between 0 and 10%. 100 = 1%
64.15 AL1 10 to 20% Percentage of samples recorded by amplitude logger 1 that
fall between 10 and 20%.
0.00 … 100.00% Amplitude logger 1 samples between 10 and 20%. 100 = 1%
64.16 AL1 20 to 30% Percentage of samples recorded by amplitude logger 1 that
fall between 20 and 30%.
0.00 … 100.00% Amplitude logger 1 samples between 20 and 30%. 100 = 1%
64.17 AL1 30 to 40% Percentage of samples recorded by amplitude logger 1 that
fall between 30 and 40%.
0.00 … 100.00% Amplitude logger 1 samples between 30 and 40%. 100 = 1%
64.18 AL1 40 to 50% Percentage of samples recorded by amplitude logger 1 that
fall between 40 and 50%.
0.00 … 100.00% Amplitude logger 1 samples between 40 and 50%. 100 = 1%
64.19 AL1 50 to 60% Percentage of samples recorded by amplitude logger 1 that
fall between 50 and 60%.
0.00 … 100.00% Amplitude logger 1 samples between 50 and 60%. 100 = 1%
64.20 AL1 60 to 70% Percentage of samples recorded by amplitude logger 1 that
fall between 60 and 70%.
0.00 … 100.00% Amplitude logger 1 samples between 60 and 70%. 100 = 1%
64.21 AL1 70 to 80% Percentage of samples recorded by amplitude logger 1 that
fall between 70 and 80%.
0.00 … 100.00% Amplitude logger 1 samples between 70 and 80%. 100 = 1%
64.22 AL1 80 to 90% Percentage of samples recorded by amplitude logger 1 that
fall between 80 and 90%.
0.00 … 100.00% Amplitude logger 1 samples between 80 and 90%. 100 = 1%
No. Name/Value Description FbEq

ABB ACS850 Specifications

General

Safety	STO (Safe Torque Off)
Communication	CANopen
Enclosure	IP21
Output Voltage	Up to 1000 V DC
Protection Features	Overcurrent, Overvoltage, Undervoltage
Cooling Method	Air or liquid cooling
Input Voltage	380 to 690 V AC